Application:

ZY Series is specifically designed for purifying insulating oil, such as transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied in power station, transformer substation, railway, petroleum, chemical and metallurgy.

Features:

• Ideal for insulating oil clean up and transfer

• Eight models are available to accommodate various flow rates

• Continuously removes free water down to 5 ppm or less

• Fluid cleanliness grade (NAS) to 6 or better

• Dual water and particulate removal

• Improve oil dielectric values

• Advanced demulsification technology

• Coalescence-separation technology

• Duplex 3D evaporation technology

• Double-infrared fluid level controller

• A trinity of interlocked preventive device

• Carbon fiber infrared heating system

• Automatic back-flushing system

• Unique H.P.M high molecule absorption material

• Explosion-proof type available

• Live-line operation feasible

Advantage:

This model is tailored according to the nature of insulating oils, so it can effectively remove liquid, solid and gas impurities from used oil, expanding the service life of oil and the operating efficiency of machinery. The recycling process also enhances oil quality and restores oil viscosity.

Functions:

1.Acidity Correction

2.Color Change

3.Sludge Reduction

Description:

Transformer oil will change color as oxidation of the oil takes place. Color, by itself, is not a reliable test in evaluating the condition of the oil for further use. It is a strong indication that something is happening within the transformer that requires investigation. Once transformer oil changes from the yellow color range into the orange and red color range, it has degraded to the point where the vital parts of the transformer are being seriously affected.

Our BZ Transformer Oil Acidity Correction Device can be used to decolorize and neutralize any petroleum oil, especially electrical insulating oils. It excels in neutralizing traces of strong inorganic acid. Due to the relatively large pores of the sorbent, it is well adapted to the removal of high molecular weight sulfonates, resins and asphalts.

States of Coexistence
Next to particlates contamination,moisture is the second-most-destructive contaminant found in machinery.

Water can exist in oil in the following three states:

Dissolved
Contrary to what I was taught, oil and water do blend. The amount of water dissolving into the oil depends upon the oil’s base stock, condition, additives, contaminants amount and temperature. Typically, oxidized, lower grade oil that is heavily additized can hold as much as 2,000 ppm moisture in the dissolved state. In this state, water is not visible in the oil.  Conversely, new, high-grade oils with minimal additives will hold little dissolved water.

Emulsified
Once the volume of moisture has passed the maximum level for it to stay dissolved, the oil becomes saturated. At this point, the water is suspended in the oil in very tinydroplets known as an emulsion. Emulsified water is often referred because it has a misty appearance.

Free
Adding more water to an emulsified oil/water mixture will lead to a separation of the two phases, producing a layer of free water. This water separates from the oil due to inherent insolubility and the specific gravity difference between the two fluids. In most cases, free water is found at the bottom of tanks and sumps.

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Application:

LYE Series Engine Oil Purification Plant is a highly efficient regeneration system, which is designed for recycling seriously deteriorated waste engine oil. The machine can efficiently remove water, gases and other harmful particles, restoring the oil’s original quality and transparency.

Feature:

•This machine adopts physical & chemical theory to get the refined and regenerated oil.

•With the special waste gas collecting and absorbing device, this machine can stop most of the harmful gas going into the air and be friendly to the environment.

•The fine filtering system use fully-automatic filter press with liquid press method to remove impurities, which have big area to filter impurities and can be operated and maintained easily.

•The advanced fully-automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the machine with high performance.

•Indirect heating used by the heating system to ensure waste oil to be heated evenly and the temperature of waste oil to be stable.

•The vacuum system is used for high-level removing the micro water and the left gas of the waste oil.

Application:
The ZYD series is specifically designed for purifying and regenerating the used insulating oil such as transformer oil, mutual oil, switch oil, etc.

Feature:

• Ideal for insulating oil clean up and transfer

• Regeneration of seriously deteriorated insulating oil

• For large power transmission equipments above 110KV

• Eight models available to accommodate various flow rates

• Continuously removes free water down to 5 ppm or less

• Fluid cleanliness grade (NAS) to 6 or better

• Powerful Vacuum design

• Dual water and particulate removal

• Coalescence-separation technology

• Duplex 3D evaporation technology

• Double-infrared fluid level controller

• A trinity of interlocked preventive device

• Carbon fiber infrared heating system

• Automatic back-flushing system.

• Unique H.P.M high molecule absorption material

• Mobile equipment for outdoor use

• Explosion-proof type available

• Live-line vacuum oiling and dehydrating feasible
Advantage:

Comparing with the single-stage type, this series adopts the double-stages vacuum system, which immensely raises the machine’s working vacuum degree, so it can dewater, degas and remove particulate impurities much more efficiently. Besides that, a special design enables this model to regenerate seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon effectively. It allows the power transmission equipment to remain in-service while impurities from it are effectively removed.

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Application:

The ZYD series is specifically designed for purifying and regenerating the used insulating oil such as transformer oil, mutual oil, switch oil, etc. Also it is the best choice of filling oil into power equipment and drying moistened power equipment.

ZYD Transformer Oil Purifier Feature:

• Ideal for insulating oil clean up and transfer

• For large power transmission equipments above 110KV

• Eight models available to accommodate various flow rates

• Continuously removes free water down to 5 ppm or less

• Fluid cleanliness grade (NAS) to 6 or better

• Powerful Vacuum design

• Dual water and particulate removal

• Coalescence-separation technology

• Duplex 3D evaporation technology

• Double-infrared fluid level controller

• A trinity of interlocked preventive device

• Carbon fiber infrared heating system

• Automatic back-flushing system.

• Unique H.P.M high molecule absorption material

• Mobile equipment for outdoor use

• Explosion-proof type available

• Live-line vacuum oiling and dehydrating feasible
Advantage:

Comparing with the single-stage type, this series adopts the double-stages vacuum system, which immensely raises the machine’s working vacuum degree, so it can dewater, degas and remove particulate impurities much more efficiently. It allows the power transmission equipment to remain in-service while impurities from it is effectively removed

The recycling process enhances oil quality comprehensively and the dielectric value of recycled oil is above 65KV.

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Application:
The ZYB series is specifically designed for purifying and regenerating the used insulating oil. It is suitable for electrical apparatus factories, power station, power supply department, transformer in railroad station and other departments.

Feature:
• Ideal for insulating oil clean up and transfer

• Eight models are available to accommodate various flow rates

• Continuously removes free water down to 5 ppm or less

• Fluid cleanliness grade (NAS) to 6 or better

• Coalescence-separation technology

• Duplex 3D evaporation technology

• Double-infrared fluid level controller

• A trinity of interlocked preventive device

• Carbon fiber infrared heating system

• Automatic back-flushing system.

• Unique H.P.M high molecule absorption material

• Explosion-proof type available
Advantage:
The series is mainly applied to transformers (below than 330KV). It is tailored according to the nature of insulating oil, therefore functions effectively to remove liquid, solid and gas impurities from used oil, expanding the service life of oil and the operating efficiency of machinery. The recycling process also enhances oil quality and restores oil viscosity.

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Skype: oil_purifier_rocky

Application:

ZY Series is specifically designed for purifying insulating oil, such as transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied in power station, transformer substation, railway, petroleum, chemical and metallurgy.

Features:

• Ideal for insulating oil clean up and transfer

• Eight models are available to accommodate various flow rates

• Continuously removes free water down to 5 ppm or less

• Fluid cleanliness grade (NAS) to 6 or better

• Dual water and particulate removal

• Improve oil dielectric values

• Advanced demulsification technology

• Coalescence-separation technology

• Duplex 3D evaporation technology

• Double-infrared fluid level controller

• A trinity of interlocked preventive device

• Carbon fiber infrared heating system

• Automatic back-flushing system.

• Unique H.P.M high molecule absorption material

• Explosion-proof type available

• Live-line operation feasible

 Technical Parameters

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Skype: oil_purifier_rocky

Product Description

TYC series is specifically designed for purifying and regenerating the used fire-resistance hydraulic oil.
Feature：

 
1. This product adopts the latest technology in vacuum oil purification machinery such as aggregation, separation transformation, resolution, vacuum entrapment and 3D flash evaporation.

2. The purifier takes the original nano-molecule purifying technology to absorb the impurities. it also reduces the contents of acid and stop the produce of the new acid.

3. The housing materials is stainless steel and other special purifying material.

Advantage
This product takes the unique nano-molecule purifying technology to make the oil containing few water and inpurities so that it can be used repeatedly in the highly precise equipment at home and abroad.

Contact: Rocky Chen

Mob: +86-15826146151

Tel:  +86-23-68681152

Fax:  +86-23-68060921

oil.purifier.rocky@gmail.com
oil_purifier_rocky@hotmail.com

Skype: oil_purifier_rocky